Epson TM-T77 / TM-T88

Epson TM-T77 and TM-T88 models are meant for use as receipt printers. To configure your receipt settings, please log into your management console and go to Settings > Settings (Advanced) > Receipts. There, you can select what items will appear on your receipts, as well as the frequency with which the receipt is printed.

Hardware Setup

If you purchased your Epson TM-T77 through Revel, the printer has already been configured to work with our router and access point. Simply plug the ethernet cord from the back of the printer (shown below outlined in red at the bottom of the printer) to any available ethernet port on the router.

NOTE: There are two different kinds of ports in the back of the printer. The ethernet port (CAT 5/CAT 6) is meant for ethernet cords ONLY. Cables connecting cash drawers should be plugged in in the upper left-hand corner in the back of printer. The port is similar to a phone jack, and therefore smaller than an ethernet cord. PLEASE DO NOT ATTEMPT to force the ethernet cord into the phone jack, or the cash drawer phone cord into the ethernet port.

Lastly, connect the power cable to a power source. Turn the printer on by flipping the switch on the front face of the printer.

Was this article helpful?
0 out of 1 found this helpful
Have more questions? Submit a request
Want to request a new feature? Click here!
Still have questions? Contact our friendly Support team