How to configure an Epson Printer

By Evelyn


To learn how to set up Epson printer hardware click on the correct printer:

Epson TM-U220B

Epson TM-T70/TM-T88

After Setting up the printer hardware follow these steps to configure the printer:

1. Open Safari

2. Type in the printer IP address and press enter. To find the printer IP address click                  


3. Select TCP/IP tab on the left

4. Set "Get IP Address" to Manual

5. Set "Set using PING" to Disabled

6. Change the IP address to the IP address found on the sticker on the side of the printer, normally it is (the last number may vary depending on how many printers there are: .206, .207, etc)

Note: If there is no sticker, contact Support for further assistance at 415-744-1433 Ext.2 or by email at

7. Hit "Submit" to save

Change the IP address of the iPad back to its original IP

1. Go to Settings

2. Click on Wi-Fi

3. Next to the network name tap on the blue "i" with a circle

4. Select the Static Tab

5. Change the IP address back to what it was originally

6. Hit Wi-Fi at the top left to save




Was this article helpful?
0 out of 2 found this helpful
Have more questions? Submit a request
Want to request a new feature? Click here!
Still have questions? Contact our friendly Support team