Need a hand setting up or using your system? The new Revel Assistant can guide you through almost anything you'd need to do, step by step. Just head to your Management Console and click the question mark in the bottom right corner to check it out!

How to print the IP address of the printer

By Aldwyn

Follow

How to Print the IP Address of the Printer

 
Epson Receipt printers (TM-T70, TM-T88, TM-M30 ethernet, TM-T20)
  1. Power the printer off
  2. Press and hold the feed button
  3. Power the printer on and continue to hold the feed button
  4. After a few seconds a settings sheet will print including the IP address of the printer receipt_settings.JPG
 
Epson U220B Kitchen Printer
  1. Ensure the printer is powered on
  2. Press and hold the ‘reset’ button on the back of the device epsonu220_back.JPG
  3. After about 5 seconds a settings paper will print including the IP address of the printer kitchen_settings.JPG
 
Star Receipt Printers (TSP100 LAN, TSP-650, TSP-700)
  1. Power the printer off
  2. Press and hold the feed button
  3. Power the printer on and continue to hold the feed button
  4. After a few seconds a settings sheet will print including the IP address of the printer (the Star TSP-700 will print two sheets, the IP address is found on the second)
 
Zebra ZD410 Label Printer
  1. Ensure the printer is powered on
  2. Press and hold the feed + cancel buttons at the same time for about 2 seconds zebra.JPG
  3. A settings sheet will print showing the IP address of the printer
  • Note: Older model Zebra LP2824 printers connect to an R212.  The R212 provides the IP address, not the printer itself.
 
 
Note: Bluetooth enabled printers such as the Epson TM-M30 Bluetooth edition or Epson P60 do not have an IP address


Was this article helpful?
7 out of 7 found this helpful
Have more questions? Submit a request
Want to request a new feature? Click here!
Still have questions? Contact our friendly Support team