Setting a Static WAN IP address on the Rosewill routers

By Sam | Updated


Make sure you are connected to the router.   This can be either by a wireless connection through your Access Point (assuming it is online and broadcasting) or through a direct ethernet connection to one of the Rosewill Router’s yellow LAN ports.

1)  Open a Web Browser and type the router’s IP address into the Address Bar:

2)  Once the Router page comes up, click the “Setup” tab in the upper left.
3) When prompted for a User Name and Password  enter:
     Name:   admin
     Password:  admin
4)  Near the top of the page under WAN Setup/Wan Connection Type:
     a)  Change the Connection Type drop down from “Automatic Configuration - DHCP”  to “Static IP”
     b)  Enter the WAN IP Address, Subnet Mask, and Gateway information as provided by your ISP.
     c)  Scroll to the bottom of the page and click “Save”  
     d)  Wait a few moments for the screen to reload and then click “Apply Settings"

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request
Want to request a new feature? Click here!
Still have questions? Contact our friendly Support team