How to Restore Default Values Mode on TM-M30 Printer

By Kelsey | Updated

Follow

If you need to restore the default values on the TM-M30 printer, please follow the below steps. 

Please Note: This action will restore the printer back to factory default settings. This should only be preformed if no other troubleshooting steps resolve the issue. 


How to Restore Default Value Modes for TM-M30

To restore the default values mode for the TM-M30 printer:

  1. After running a self test on the printer, hold down the Feed button for at least one second. This will open the Mode selection.
  2. The Mode Selection guidance will print and the Paper LED will flash.
  3. Briefly press the Feed button four times (less than one second), hold it down for at least one second to enter the Restore Default Values. The guidance will print.
  4. Briefly press the Feed button once (less than one second), hold it down for at least one second. (Hold down the Feed button until the message of restore completion is printed.

Find the entire TM-M30 manual here



Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Want to request a new feature? Click here!
Still have questions? Contact our friendly Support team